Description

Weathering can have a dramatic effect on your decking, making bright and clean surfaces become murky and worn. Our Decking Restorer is the quick and easy way to safely restore your tired looking deck back to its natural appearance. The result, with the minimal amount of effort and fuss, is bare and natural wood ready to be protected or painted.

Product features

  • Helps your decking last longer
  • Works in just 15 minutes
  • Low odour
  • Safe for plants and grass
  • Restores weathered and grey decking

Technical specification

Usage Ridged or smooth hardwood and softwood decking
Coverage Up to 8m2 per litre
Works in 15 minutes
Number of coats One
Application Brush
Sizes 2.5L
VOC Low
Decking Restorer
Find a stockist

Number of coats

One coat

Coverage

Up to 8m2 per litre

Application

Brush on

Use on...

Before you start

Remove gatherings of moss, mould and algae with a stiff brush. Test Decking Restorer on a small area to make sure you're happy with the end results.

Application
  1. First, give the tin a good stir.
  2. Get loads of Decking Restorer on your brush and work on around 3-4 deck boards at a time.
  3. Work the Decking Restorer into the surface of the deck by scrubbing with a stiff brush.
  4. Allow 15 minutes and then re-scrub before rinsing off with clean water.
  5. One application will normally be enough, however, in cases of extreme weathering you may need to apply again.
  6. Allow the wood to dry completely (usually 2 days) before applying any oils, stains or paints.

To keep your newly restored deck looking its best, choose a Ronseal decking finish: Ultimate Protection Decking Stain for durable colour and protection or Ultimate Protection Decking Oil for protection and nourishment.

Aftercare

Cleaning

Take as much Restorer as possible off your brush and then clean it in warm, soapy water. Don’t empty any leftover Restorer into drains or watercourses. For more information, contact your local council.

Maintenance

Your decking should never be left without a stain or oil coating as this could result in it becoming damaged.

Why do I need to protect my deck?

Decking is expensive so you'll need to protect it to stop the sun turning it grey or the rain damaging it. You can use a decking stain or an oil, both will protect it and keep it looking great.

What's the difference between a stain and an oil?

The difference is in the finish and the level of protection. An oil soaks in to wood and nourishes it. It gives wood a lightly tinted finish. A stain gives richer colour and a bit more protection.

What's Ultimate Decking Stain and Ultimate Decking Oil?

Our Ultimate Decking Stain and Oil are guaranteed to last twice as long so you'll get the most out of your deck. They give the best protection against the weather and everyday use.

What's the best way to clean decking?

You'll need to clean your decking a couple of times a year to keep it looking its best. Ronseal Decking Cleaner and Reviver is great at cleaning and reviving weathered or tired timber decking. It can be use as a general cleaner to brighten and enhance your deck throughout the year. It's also ideal for use as a pre-treatment too, as it opens the grain of the wood to allow the new coating to stick for a longer lasting finish. Start by removing any moss, mould or algae off the deck with a stiff brush. Pour Ronseal Decking Cleaner & Reviver directly onto your deck, and scrub the surface immediately using a stiff brush then leave for about 15-20 minutes. For the best results, wash thoroughly with a pressure washer. Work from one end of a decking board to the other. Alternatively, scrub the surface with a stiff brush then hose it down. Make sure you completely wash off all the product, otherwise it could affect future coatings.

Are your decking products eco-friendly?

Our Ultimate Protection Decking StainOil and Paints don't have an unpleasant smell and are safe to use around plants and pets (although wait for your decking to dry before letting them walk on it). You can wash your brushes out in warm, soapy water.

Do you offer clear decking coatings?

For a clear decking coating, try one of our natural finishes. We don't offer completely clear finishes, as you need to have a little bit of a tint in to protect your decking from the sun. Ronseal Ultimate Protection Decking Oil is available in a variety of colours including Natural, Natural Cedar, Natural Oak and Natural Pine.

Can you advise what's the best way to use decking stripper?

Stripping your deck doesn't have to be back breaking work. Our Decking Stripper is really easy to use and works in no time at all. All you need is a nice warm day, above 10°. Make sure you wear some gloves. Give the tin a good shake then pour the Stripper into a metal or plastic bowl or tray. Use a good sized brush, around 4 inches, to put a thick layer on. Work in small sections and don't paint yourself into a corner. Leave it to work for about 30 minutes, if it's a particularly hot day, re-apply the Stripper over any patches that start to dry out. After 30 minutes, scrape the surface with something sharp like a paint scraper to see if it's worked. If not, put a bit more on and leave for 10-15 minutes. You then need to give it a scrub with a stiff brush. Scrub along the grooves and also across them to help loosen the finish underneath. Pour on some water and keep scrubbing. Finally, give it a good wash down with a hose or jet wash. Let your deck dry out for a couple of days. You'll then be ready to stain or oil it.

Can you recommend a decking applicator tool?

The Ronseal Perfect Finish range is the easiest way to protect your deck. It comes with the handy Perfect Finish decking applicator pad and pole, putting an end to getting on your hands and knees with a brush.

Why do I need to use decking end grain preserver?

When decking has been pre-treated, it is possible that the end grains will be left unprotected after they have been cut. To protect these end grains from wet and dry rot, you'll need to treat them.

Can I order a sample decking paint?

Unfortunately we aren't able to provide sample pots, however we work hard to ensure that the colour chips in store and the shade labels on the tin are as accurate as possible to help you make your decision.

I'm looking for a cedar red decking stain, which products can I choose from?

Our Ultimate Protection Decking Stain comes in 13 colours including Cedar. If you're looking for deeper tones, look for Mahogany or Dark Oak. For a more natural finish, try our Decking Oil. For bolder, opaque finishes, as well as some contemporary colours, try our Ronseal Xactly

Do you have a black or dark blue decking stain?

Ronseal Ultimate Protection Decking Stain is available in a range of wood tones, as well as more contemporary options like Charcoal, Slate, Stone Grey and White Wash. If it's an opaque blue or black colour that you're after, try Ronseal Decking Rescue Paint Deep Blue or Charcoal.

What's your equivalent to Liberon Decking Oil?

Ronseal Decking Oil provides decking with natural looking protection against the weather and foot traffic. It takes 2 hours to dry, and can be re-coated in 6 hours. If you have less time, try our Ultimate Protection Decking Oil which offers the same protection levels but is dry in just 90 minutes and can be recoated in 4 hours.

Can I get a replacement decking applicator pad?

The Perfect Finish Decking Applicator Pads are sold as part of the Perfect Finish pack and are not available separately.

Do you provide a sprayable decking treatment?

We do not recommend that you spray any of our decking products and don't have a sprayable decking protector product available.