Multi Purpose Powder Smooth Finish Filler
Description
Fill holes in almost any surface including plaster, stone, concrete and wood. Our Multi Purpose Powder has a smooth finish so it’s easy to sand. It’s tough too and won’t shrink or crack.
Product features
- Fill holes up to 40mm deep
- Comes with a measuring scoop and applicator
- Dry in one to two hours
- Suitable for interior and exterior use
- Minimal prep needed
Data sheets
Usage | Interior or exterior surfaces including plaster, stone, concrete and wood. |
Dry time | One to two hours |
Coat time | One to two hours |
Number of coats | One for holes smaller than 40mm, several for holes over 40mm. |
Colours | White |
Finish | Matt |
Durability | Fills deep holes and leaves a tough repair that won’t shrink or crack |
Application |
Flat scraper |
Filler base | Water |
Size | 500G, 1KG, 2KG |
VOC | Minimal |
How do the colours look?
Use on...
There’s not a lot of preparation needed, all you have to do is make sure the area is clean from grease and dust and dry too.
- Using the measuring scoop, mix two parts filler to one part water.
- Push the filler firmly into the hole or crack, leaving a little bit slightly raised above the surface to ensure it’s completely filled.
- Before it dries, smooth it with a wet knife.
- If you’re filling holes that are deeper than 40mm, you will need to build up in layers waiting one to two hours between layers. Before each is dry, smooth over with a wet knife.
After one to two hours, you’ll be able to redecorate over the filler.
Cleaning
Tools can all be cleaned in warm, soapy water.