Multi-Purpose Wood Treatment
Description
Multi-Purpose Wood Treatment protects all interior and exterior wood from rot and insect attacks. It soaks deep into the wood so prevents future infestations from woodworm and other insects. It can also be sprayed so application is quick and easy.
Product features
- Long last protection with a clear finish
- Prevents wet and dry rot
- Stops woodworm attacks and infestations
- Protects against insect attacks
- Can be painted over with paint, stain, oil or varnish
Data sheets
Usage: | Interior and exterior rough sawn wood |
Coverage: | Up to 8m2 per litre |
Dry time: | Ready to paint over in 24 hours |
Coat time: | 1-2 hours |
Number of coats: | Three |
Colours: | Clear |
Finish: | Gloss |
Durability: | Prevents wet and dry rot and prevent insect attacks and infestations |
Application: | Brush or sprayer |
Base: | Water |
Sizes: | 2.5L, 5L |
VOC: | Minimal |
How much paint do I need?
Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how mnay litres you'll need to complete your project.
How do the colours look?
Use on...
- Use a brush or sprayer to apply a thin coat to your wood. End grains should be dipped and don’t forget about joints too.
- Wait roughly 1-2 hours for the first coat to dry.
- Apply the second coat.
- Wait roughly 1-2 hours for the second coat to dry.
- Apply the third coat.
- After 24 hours your wood will be ready to paint over.
Multi-Purpose Wood Treatment is suitable for brand new wood. If you treat it at the beginning, you won’t have to worry about it.
Cleaning
Remove as much product from your brush or sprayer as possible and then clean it in warm soapy water.
You should never pour unused treatment down the drain. Instead, contact your local council for information on the proper way to dispose of it.
Maintenance
Multi-Purpose Wood Treatment can be varnished, oiled or painted over. It will protect again all future infestations and put a stop to wet and dry rot.