Quick Drying Smooth Finish Filler
Description
Reclaim your afternoon and fill holes quickly instead of spending hours on the job. Our Quick Drying Filler gets the job done in only 30 minutes and can fill gaps in walls up to 10mm. It leaves a smooth finish that can be painted over so the repair blends in.
Product features
- Fast acting and ideal for last minute repairs
- Dry in 30 minutes
- Fills holes up to 10mm
- Can be drilled once it’s dry
- Suitable for plaster, stone, concrete and wood
- Available in tubs or tubes
Technical Specification
| Usage | Interior design like plaster, stone, concrete and wood. |
| Coverage | Fills holes up to 10mm |
| Dry time | 30 minutes |
| Coat time | 30 minutes |
| Number of coats | One for holes up to 10mm, several for deeper holes |
| Colours | White |
| Finish | Matt |
| Durability | Quickly fills holes and leaves a tough finish that can be drilled |
| Application | Flat scraper |
| Sizes | 330g, 600g. |
| VOC | Minimal |
How do the colours look?
Use on...
Interior wood
Plaster
Interior stone or concrete
Ensure the surface and cracks are clean, dry and free from dust, grease and other contamination.
- Firmly push the filler into the hole or crack leaving some slightly raised above the surface to ensure the hole is properly repaired.
- Before the filler dries, smooth it with a wet knife.
- If the hole you are filling is bigger than 10mm, you will need to build the layers up. After you’ve smooth over the first layer, leave it to dry for 30 minutes and then apply another. Repeat the process until the hole is filled.
Once your filler is dry, it will be ready to paint over.
Aftercare
Tools can be cleaned in warm, soapy water.