Stain Block Aerosol
Description
Permanently stop household stains from showing through your paint with Stain Block Aerosol. It’s quick dry and blocks just about anything including crayon, red wine and dirt.
Product features
- Easy to use and quick drying
- Only requires two to three coats
- No need for brushes so there’s nothing to clean up
Technical specification
Usage: | All bare or previously painted interior walls and ceilings |
Dry time: | Recoat in 10 minutes, decorate after 4 hours |
Coat time: | 10 minutes |
Number of coats: | Two to three |
Colours: | White |
Finish: | Matt |
Durability: | Prevents damp from staining and showing through paint or wallpaper |
Application: | Spray on aerosol |
Sizes: | 400ml |
How much paint do I need?
Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.
How do the colours look?
Use on...
Our stain block works best if your room is above 10°c. Open the doors and windows for added ventilation and put down dust sheets to protect your furniture from paint. Always wear a mask to avoid inhaling the fumes.
- Shake the can until you hear it rattle and then carry on for another minute.
- Hold the can 20-30cm away from the wall or ceiling and spray from side to side for an even finish.
- Wait 10 minutes for the first coat to dry.
- Apply a second coat and wait 10 minutes again for it to dry. After the second coat, assess the stain and apply a third if it’s still visible.
- Wait 24 hours for the paint to fully dry before decorating over.
Wait until the paint is completely dry before you cover it with paint or wallpaper. This isn’t intended to be a top coat, so you should cover it.
Cleaning
To clean the aerosol, turn the can upside down and spray it for a few seconds. Wipe the nozzle with a damp cloth.